Almost any type of kitchen or bath fixture can be reglazed.  Reglazing can be done on bathtubs, showers, sinks, countertops, vanity tops, and ceramic tile.

Besides porcelain, reglazing can be done on fiberglass, acrylics, formica, ceramic tile, cultured marble, or virtually any solid surface.

Your fixture can be reglazed in virtually any color you choose, from basic white or almond to any color in the Sherwin-Williams color palette.  We can also match major manufacturer colors such as American Standard White  or Kohler Bisque.  There is a $25 tinting charge for special order colors.

We being by removing all the old caulk from around the tub.  The tub is then thoroughly cleaned, and any nicks, chips, or scratches are repaired.  The walls and floors are masked and protected with drop cloths to prevent overspray.

An industrial primer is sprayed on, followed by spraying the acrylic urethane topcoat.

The masking tape and paper are removed and we recaulk your tub.

Your existing faucets and drains can be left in place.  We will mask around them while we are spraying the tub.

If you are planning to replace your faucets and hardware, it is best to remove the old ones before reglazing, and then install the new ones after the coating has cured.

Please note: Amazing Glaze does not do any plumbing work, including removing or installing faucets or drains.  Please make other arrangements for that work to be done.

Most fixtures can be refinished in a total of 4-6 hours.  The finish will dry to the touch within 30 minutes, but must be allowed to cure for at least 24 hours before use.

Refinishing can usually be completed in one day, but on occasion conditions may require that we return the next day to buff & polish the tub.  This usually becomes necessary when other construction is going on and there is dust and debris in the air.

It depends on the ventilation available in your home.  If there is an open window in the area we are working, our high speed fans will remove the odor directly outside.

If there is no window in the area, we use ventilation ducting to vent to the nearest window.  Any odor in the house will dissipate quickly and should be completely gone within a few hours.

Refinished surfaces should only be cleaned with non-abrasive, water-based cleaners such as Scrubbing Bubbles or Formula 409.  Abrasive cleaners, inlcuding Soft Scrub, should not be used on reglazed surfaces.  Using inappropriate cleansers on your fixture will void your warranty.

Use of bath mats or other items such as children's toys with suction-cup materials on them will void your warranty.  A permanent non-skid additive is available for the bottom of your tub during reglazing for an additional charge.

Amazing Glaze warrants your work for 3 years against chipping, peeling, cracking, and lifting. 

With proper care, your refinished fixture should last 10 years or more.